Publications

Links to my Google Scholar, Scopus, Linkedin, and ORCID profiles

Publication Count (updated on 12 April 2020)

	No.
Books/Edited Books	2
Edited Conference Proceedings	2
Chapter in Book	3
Journal Articles	57
Articles in Magazines/Bulletins	13
Invited Papers	2
Articles in Conference Proceedings	54
Posters	4
Thesis/Dissertations	3
Research Reports (Unpublished)	2
TOTAL	142

Books/Edited Books (2)

• Mohd. Farid Mohamed & Sudharshan Naidu Raman. (2014). In Between: Design Portfolios. Bangi, Malaysia: Faculty of Engineering and Built Environment, UKM: 180 pgs. (ISBN: 978-983-2982-50-0).
• Mohd. Farid Mohamed & Sudharshan Naidu Raman. (2012). In Between: Form + Being. Bangi, Malaysia: Faculty of Engineering and Built Environment, UKM: 244 pgs. (ISBN: 978-983-2982-41-8).

Edited Conference Proceedings (2)

• Mohd. Zamin Jumaat, Hilmi Mahmud, U. Johnson Alengaram, Sudharshan N. Raman, Hamidah Mohd. Saman, Zainah Ibrahim & Nor Hafizah Ramli @ Sulong. (2012). Proc. of the 11th Int. Conf. on Concrete Engineering and Technology. Kuala Lumpur, Malaysia: Department of Civil Engineering, University of Malaya: 540 pgs. (ISBN: 978-967-0380-12-4).
• Hilmi Mahmud, Shatirah Mohd. Akib & Sudharshan N. Raman. (2004). Proc. of the 8th Int. Conf. on Concrete Engineering and Technology. Kuala Lumpur, Malaysia: Department of Civil Engineering, University of Malaya. (in CD-ROM).

Chapters in Books (3)

• S. Sakir, S. N. Raman, A. B. M. Amrul Kaish, A. A. Mutalib. (2020). “Calibration of ASTM C230 Cone for Measuring Flow Diameter of Self-flowing Mortar According to the EFNARC Recommendation”. in V. Mechtcherine, K. Khayat, E. Secrieru (eds), RILEM Bookseries Vol. 23, Rheology and Processing of Construction Materials: pp. 266-272. RheoCon 2019, SCC 2019. Springer, Cham. (ISBN: 978-3-030-22565-0)
• S. N. Raman, H. M. C. C. Somarathna, A. A. Mutalib, K. H. Badri, M. R. Taha. (2018). “Bio-Based Polyurethane Elastomer for Strengthening Application of Concrete Structures Under Dynamic Loadings”. in Taha, M. R. (eds), Chapter 96 – International Congress on Polymers in Concrete (ICPIC 2018): Polymers for Resilient and Sustainable Concrete Infrastructure: pp. 751-757. Springer, Cham. (ISBN: 978-3-319-78175-4).
• Sudharshan N. Raman. (2012). “New Generation Concrete in Construction: 150 MPa and Beyond”. in In Between: Form + Being (Edited by M. F. Mohamed & S. N. Raman): pp. 120-123. Bangi, Malaysia: Faculty of Engineering and Built Environment, UKM. (ISBN: 978-983-2982-41-8).

Journal Articles (57)

• H. M. C. C. Somarathna, S. N. Raman, D. Mohotti, A. A. Mutalib, K. H. Badri. (2020). “Hyper-Viscoelastic Constitutive Models for Predicting the Material Behavior of Polyurethane under Varying Strain Rates and Uniaxial Tensile Loading”. Construction and Building Materials 236 (117417): pp. 1-16.
• Anupoju Rajeev, Sai Sharath Parsi, Sudharshan N. Raman, Tuan Ngo, Amit Shelke. (2020). “Experimental and numerical investigation of an exterior reinforced concrete beam-column joint subjected to shock loading”. International Journal of Impact Engineering 137 (103473): 1-17.
• R. Prakash, R. Thenmozhi, S. N. Raman, C. Subramanian. (2020). “Characterization of Eco-Friendly Steel Fiber-Reinforced Concrete Containing Waste Coconut Shell as Coarse Aggregates and Fly Ash as Partial Cement Replacement”. Structural Concrete 21(1): pp. 437-447. 
• Kazi Tamanna, Sudharshan N. Raman, Maslina Jamil, Roszilah Hamid. (2020). “Utilization of Wood Waste Ash in Construction Technology: A Review”. Construction and Building Materials 237 (117654): pp. 1-11.
• R. Prakash, R. Thenmozhi, Sudharshan N. Raman, C. Subramanian. (2020). “Fibre Reinforced Concrete containing Waste Coconut Shell Aggregate, Fly Ash and Polypropylene Fibre”. Revista Facultad de Ingeniería, Universidad de Antioquia 94: pp. 33 -42.
• Prabhani Ranaweera, Dakshitha Weerasinghe, P. L. N. Fernando, Sudharshan N Raman, Damith Mohotti. (2020). “Ballistic Performance of Multi-metal Systems”. International Journal of Protective Structures. (In-press).
• R. Prakash, R. Thenmozhi, S. N. Raman, C. Subramanian, N. Divyah. (2020). “An Investigation of Key Mechanical and Durability Properties of Coconut Shell Concrete with Partial Replacement of Fly Ash”. Structural Concrete. (In-press).
• Jacob L. G. Lim, Sudharshan N. Raman, Md. Safiuddin, Muhammad Fauzi Mohd. Zain, Roszilah Hamid. (2019). “Autogenous Shrinkage, Microstructure, and Strength of Ultra-High Performance Concrete Incorporating Carbon Nanofibers”. Materials 12(2), 320: pp. 1-15.
• Masoud Abedini, Sudharshan N. Raman, Azrul A. Mutalib, Ebrahim Akhlaghi. (2019). “Strengthening of the Panel Zone in Steel Moment Resisting Frames”. Advances in Computational Design 4(4): pp. 327-342.
• Chin-Ong Woon, Sudharshan N. Raman, Md. Safiuddin, Maslina Jamil, Muhammad Fauzi Mohd. Zain. (2019). “Development of an Assessment Method to Evaluate the Quality of Remedial Treatments on Concrete Flat Roofs of Multiple Buildings”. Buildings 9(5) 124: pp. 1-15.
• M. Abedini, Azrul A. Mutalib, Sudharshan N. Raman, R. Alipour, E. Akhlaghi. (2019). “Pressure–Impulse (P–I) Diagrams for Reinforced Concrete (RC) Structures: A Review”. Archives of Computational Methods in Engineering 26(3): pp. 733-767.
• R. Prakash, G. Thenmozhi, S. N. Raman. (2019) “Mechanical Characterization and Flexural Performance of Eco-Friendly Concrete produced with Fly Ash as Cement Replacement and Coconut Shell Coarse Aggregate”. International Journal of Environment and Sustainable Development 18(2): pp. 131-148.
• M. H. Md Zahir, C.O. Woon, S. N. Raman, M. F. Mohamed, Z. M. Nopiah. (2019). “Kajian Persepsi Arkitek Terhadap Pelaksanaan Bumbung Hijau di Malaysia: Faedah, Halangan dan Cadangan”. Jurnal Kejuruteraan (Journal of Engineering) 31(2): 375-381. (in Malay Language with English Abstract).
• Jacob L. G. Lim, Sudharshan N. Raman, Fook-Chuan Lai, Muhammad Fauzi Mohd. Zain, Roszilah Hamid. (2018). “Synthesis of Nano Cementitious Additives from Agricultural Wastes for the Production of Sustainable Concrete”. Journal of Cleaner Production 171: pp. 1150-1160.
  
• Z. I. Syed, S. N. Raman, T. Ngo, P. Mendis, T. Pham. (2018). “The Failure Behaviour of Reinforced Concrete Panels under Far-Field and Near-Field Blast Effects”. Structures 14:  pp. 220-229.
• A. B. M. A. Kaish, M. Jamil, S. N. Raman, M. F. M. Zain, Luftun Nahar. (2018). “Ferrocement Composites for Strengthening of Concrete Columns: A Review”. Construction and Building Materials 160: pp. 326-340.
• J. L. G. Lim, S. N. Raman, R. Hamid, M. F. M. Zain, F. C. Lai. (2018). “Characterization of Ultra-High-Performance Cementitious Composite incorporating Carbon Nanotubes”. Jurnal Teknologi (Sciences & Engineering) 80(2): 17-25.
• Masoud Abedini, Azrul A. Mutalib, Sudharshan N. Raman, Ebrahim Akhlaghi. (2018). “Modeling the Effects of High Strain Rate Loading on RC Columns using Arbitrary Lagrangian Eulerian (ALE) Technique”. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 34(1), 24. (Scopus).
• Mohamed H. Mussa, Azrul A. Mutalib, Roszilah Hamid, Sudharshan N. Raman. (2018). “Dynamic Properties of High Volume Fly Ash Nanosilica (HVFANS) Concrete subjected to Combined Effect of High Strain Rate and Temperature”. Latin American Journal of Solids and Structures 15(1).
• R. Prakash, G. Thenmozhi, S. N. Raman. (2018) “Mechanical Characterization and Flexural Performance of Eco-Friendly Concrete produced with Fly Ash as Cement Replacement and Coconut Shell Coarse Aggregate”. International Journal of Environment and Sustainable Development. (In-press).
• Maryam Qays Oleiwi, Mohd. Farid Mohamed, Adi Irfan Che-Ani, Sudharshan N. Raman. (2017). “Sustainability of Industrialised Building System for Housing in Malaysia”. Proceedings of the Institution of Civil Engineers – Engineering Sustainability. (in press).
• Muhannad F. A. Al-Jebouri, Mohamed S. Saleh, Sudharshan N. Raman, Riza Atiq Abdullah O. K. Rahmat, Awni K. Shaaban. (2017) “Toward a National Sustainable Building Assessment System in Oman: Assessment Categories and Their Performance Indicators”. Sustainable Cities and Society 31: pp. 122-135.
• Muhannad Fadhil Al-Jebouri, Awni K. Shaaban, Sudharshan N. Raman, Riza Atiq Abdullah O. K. Rahmat. (2017) “Framework of Environmental Rating System for Home Buildings in Oman”. ASCE Journal of Architectural Engineering 23(2): pp. 04017003:1-19.
• Mohamed H. Mussa, Azrul A. Mutalib, Roszilah Hamid, Sudharshan R. Naidu, Noor Azim Mohd Radzi, Masoud Abedini. (2017). “Assessment of Damage to an Underground Box Tunnel by a Surface Explosion”. Tunneling and Underground Space Technology 66: pp. 64-76.
• Masoud Abedini, Azrul A. Mutalib, Sudharshan N. Raman. (2017). “P-I Diagram Generation for Reinforced Concrete (RC) Columns under High Impulsive Loads using ALE Method”. Journal of Asian Scientific Research 7(7): pp. 253-262.
• Masoud Abedini, Azrul A. Mutalib, Sudharshan N. Raman, Ebrahim Akhlaghi, Mohamed H. Mussa, Mohammad Ansari. (2017). “Numerical Investigation on the Non-Linear Response of Reinforced Concrete (RC) Columns subjected to Extreme Dynamic Loads”. Journal of Asian Scientific Research 7(4): pp. 86-98.
• Leila Soufeiani, Sudharshan N. Raman, Mohd. Zamin Bin Jumaat, Ubagaram Johnson Alengaram, Ghasem Ghadyani, Priyan Mendis. (2016). “Influences of the Volume Fraction and Shape of Steel Fibers on Fiber-Reinforced Concrete Subjected to Dynamic Loading – A Review”. Engineering Structures 124: pp. 405-417.
• Shamir Sakir, S. N. Raman, A. B. M. A. Kaish, A. A. Mutalib. (2016). “Self-flowing Mortar for Ferrocement in Strengthening Applications”. Perspectives in Science 8: pp. 673-676.
• H. M. Chandima Chathuranga Somarathna, Sudharshan N. Raman, Khairiah Haji Badri, Azrul A. Mutalib, Damith Mohotti & Sri Devi Ravana. (2016). “Quasi-Static Behavior of Palm-Based Elastomeric Polyurethane: For Strengthening Application of Structures under Impulsive Loadings”. Polymers 8(5): pp. 1-20.
• Md. Safiuddin, Sudharshan N. Raman, Md. Abdus Salam & Mohd. Zamin Jumaat. (2016). “Modeling of Compressive Strength for Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash”. Materials 9(5): pp. 1-13
• M. Jamil, A. B. M. A. Kaish, S. N. Raman, M. F. M. Zain & M. R. Awal. (2016). “An Approach to Improve Conventional Square Ferrocement Jacket for Strengthening Application of Short Square RC Column”. Materials and Structures 49(6): pp. 1025-1037.
  
• Md. Safiuddin, Sudharshan N. Raman & Muhammad Fauzi Mohd. Zain. (2015). “Effects of Medium Temperature and Industrial By-Products on the Key Hardened Properties of High Performance Concrete”. Materials 8(12): pp. 8608-8623.
• Damith Mohotti, Sudharshan N. Raman, Tuan Ngo & Priyan Mendis. (2015). “Use of Coupled Smooth-Particle Hydrodynamics/Lagrangian Method in the Simulation of Deformable Projectile Penetration”. International Journal of Protective Structures 6(3): pp. 419-437.
• H. M. C. C. Somarathna, S. N. Raman, A. A. Mutalib & K. H. Badri. (2015). “Elastomeric Polymers for Blast and Ballistic Retrofitting of Structures”. Jurnal Teknologi (Sciences & Engineering) 76(1): pp. 1-13.
• Damith Mohotti, Tuan Ngo, Sudharshan N. Raman & Priyan Mendis. (2015). “Analytical and Numerical Investigation of Polyurea Layered Aluminium Plates subjected to High Velocity Projectile Impact”. Materials & Design 82: pp. 1-17.
• M. Jamil, A. B. M. A. Kaish, S. N. Raman & M. F. M. Zain. (2015). “Axial Behavior of Ferrocement Confined Cylindrical Concrete Specimens with Different Sizes”. Construction and Building Materials 78: pp. 50-59.
• Damith Mohotti, Tuan Ngo, Sudharshan N. Raman, Muneeb Ali & Priyan Mendis. (2014). “Plastic Deformation of Polyurea Coated Composite Aluminium Plates subjected to Low Velocity Impact”. Materials and Design 56: pp. 696-713.
• Damith Mohotti, Tuan Ngo, Priyan Mendis & Sudharshan N. Raman. (2013). “Polyurea Coated Composite Aluminium Plates subjected to High Velocity Projectile Impact”. Materials & Design 52: pp. 1-16.
• M. Jamil, A. B. M. A. Kaish, S. N. Raman & M. F. M. Zain. (2013). “Pozzolanic Contribution of Rice Husk Ash in Cementitious System”. Construction and Building Materials 47: pp. 588-593.
• S. N. Raman, T. Ngo, J. Lu & P. Mendis. (2013). “Experimental Investigation on the Tensile Behavior of Polyurea at High Strain Rates”. Materials & Design 50: pp. 124-129.
• Shiva Imani Moghadasi, Sri Devi Ravana & Sudharshan N. Raman. (2013). “Low-Cost Evaluation Techniques for Information Retrieval Systems: A Review”. Journal of Informetrics 7(2): pp. 301-312.
• S. N. Raman, T. Ngo, P. Mendis & T. Pham. (2012). “Elastomeric Polymers for Retrofitting of Reinforced Concrete Structures against the Effects of Blast”. Advances in Materials Science and Engineering 2012(ID 754142): 8 pgs. doi:10.1155/2012/754142.
• S. N. Raman, T. Ngo, P. Mendis & H. B. Mahmud. (2011). “High-Strength Rice Husk Ash Concrete incorporating Quarry Dust as a Partial Substitute for Sand”. Construction and Building Materials 25(7): pp.3123-3130.
• S. N. Raman, T. Ngo & P. Mendis. (2011). “A Review on the Use of Polymeric Coatings for Retrofitting of Structural Elements against Blast Effects”. Electronic Journal of Structural Engineering 11: pp. 69-80.
• H. B. Mahmud, M. F. A. Malik, R. A. Kahar, M. F. M. Zain & S. N. Raman. (2009). “Mechanical Properties and Durability of Normal and Water Reduced High Strength Grade 60 Concrete containing Rice Husk Ash”. Journal of Advanced Concrete Technology 7(1): pp. 21-30.
• S. N. Raman, Md. Safiuddin & M. F. M. Zain. (2007). “Non-Destructive Evaluation of Flowing Concretes Incorporating Quarry Wastes”. Asian Journal of Civil Engineering 8(6): pp. 597-614.
• Md. Safiuddin, Sudharshan Naidu Raman & Muhammad Fauzi Mohd. Zain. (2007). “Flowing Concretes with Quarry Waste Fine Aggregate”. Journal of Civil Engineering Research and Practice 4(1): pp.17-25.
• Md. Safiuddin, S. N. Raman & M. F. M. Zain. (2007). “Effect of Different Curing Methods on the Properties of Microsilica Concrete”. Australian Journal of Basic and Applied Sciences 1(2): pp. 87-95.
• Md. Safiuddin, S. N. Raman & M. F. M. Zain. (2007). “Utilization of Quarry Waste Fine Aggregate in Concrete Mixtures”. Journal of Applied Sciences Research 3(3): pp. 202-208.
• Kanesan Muthusamy, Sh. Rosfashida S. A. Latif, W. S. Wei, Rosli Hamir, Mansor Fadzil & R. S. Naidu. (2007). “Bachelor of Education (Engineering) Program – The Open University Malaysia Model”. Asian Journal of Distance Education 5(2): pp. 13-22.
• S. D. Ravana, S. N. Raman & P. P. Ooi. (2007). “Analysis, Design & Development of Sports Information Portal: Supporting Participation in Sports Events”. Journal of Applied Sciences Research 3(8): pp. 757-763.
• S. N. Raman, M. F. M. Zain, H. B. Mahmud, K. S. Tan & K. M. Yusof. (2005). “Effect of Partial Replacement of Sand with Quarry Dust on the Properties of Concrete”. AEESEAP Journal of Engineering Education 31(1): pp. 24-32.
• Muhammad Fauzi Mohd. Zain, Sudharshan Naidu Raman & Md. Safiuddin. (2000). “Pengaruh Penggantian Sebahagian Pasir dengan Debu Kuari ke atas Ciri Konkrit Prestasi Tinggi Baru”. Jurnal Kejuruteraan 12: pp. 21-30.
• Wan Muhd. Aminuddin Wan Hussin & R. Sudharshan Naidu. (1999). “Tegangan dan Kesannya Terhadap Prestasi Jurutera di Tapak”. Annual Bulletin of The Institution of Engineers Malaysia, Perak Branch: pp. 19-23.

Articles in Magazines/Bulletins (13)

• Sudharshan N. Raman. (2019). “CSETD AGM Talk on “Ultra-High Performance Fiber Reinforced Concrete (UHPFRC): Technology for the Present and Future”. Jurutera Online – Online Bulletin of The Institution of Engineers, Malaysia: 3 pgs. 29 May 2019. (http://www.myiem.org.my/download/detail.aspx?id=17255).
• Sudharshan N. Raman. (2019). “Technical Visit To The Exchange 106 Project”. Jurutera Online – Online Bulletin of The Institution of Engineers, Malaysia: 4 pgs. 10 April 2019. (http://www.myiem.org.my/download/ detail.aspx?id=16881).
• Sudharshan N. Raman. (2018). “Malaysian Concrete Canoe Competition and Malaysia’s Longest Concrete Canoe”. Concrete International – June 2018, Vol. 40, No. 6: pp. 18-19. http://www.concreteinternational.com. (ISSN (US) 0162-4075).
• Sudharshan N. Raman. (2017). “Talk on Civil Engineers’ Role in Green Buildings”. Jurutera Online – Online Bulletin of The Institution of Engineers, Malaysia: 2 pgs. 22 February 2017. (http://www. myiem.org.my/content/civil_structural_engineering-425.aspx).
• Sudharshan N. Raman. (2015). “High Strain Rate Mechanical Chacterisation of Carbon Nanotubes Enhanced Ultra-High-Performance Cementitious Composites”. Innovate 8: pp. 13.
• Sudharshan N. Raman. (2015). “Synthesis of Elastomeric Polymers for Robust Strengthening of Reinforced Concrete Structures subjected to Blast Effects”. Innovate 8: pp. 17.
• Mohd. Farid Mohamed, Sudharshan N. Raman, Tito Maulana Iman Pratama and Wardah Fatimah Mohammad Yusoff. (2015). “The Outdoor Environments of Low-Cost Housing: A Case Study at the Taman Desa Sentosa Apartments”. Innovate 8: pp. 26-28.
• Sudharshan N. Raman. (2014). “Two-Day Course on Simplified-Unified Practical Design to MS EC0, MS EC1 and MS EC2 from a Consulting Engineer’s Perspective”. Jurutera – The Monthly Bulletin of The Institution of Engineers, Malaysia 2014(9), Sept. 2014: pp. 37-38High Strain Rate Mechanical Chacterisation of Carbon Nanotubes Enhanced Ultra-High-Performance Cementitious Composites.
• Sudharshan N. Raman. (2007). “Report: Seminar on Connections in Steel-Concrete Composite Construction by Professor N. E. Shanmugam”. Jurutera – The Monthly Bulletin of The Institution of Engineers, Malaysia 2007(11), Nov. 2007: pp. 13.
• Sudharshan N. Raman, Mohd. Zamin Jumaat, Hilmi Bin Mahmud & Muhammad Fauzi Mohd. Zain. (2007). “Fibre Reinforced Concrete & High Performance Fibre Reinforced Cementitious Composites: An Overview”. Jurutera – The Monthly Bulletin of The Institution of Engineers, Malaysia 2007(7), Jul. 2007: pp. 32-35.
• Sudharshan N. Raman. (2007). “Report on Two-Day Course on Practical Design to BS8110 from Consulting Engineer’s Perspective”. Jurutera – The Monthly Bulletin of The Institution of Engineers, Malaysia 2007(6), Jun. 2007: pp. 36-37.
• Sudharshan N. Raman, Hilmi Bin Mahmud & Mohd. Zamin Jumaat. (2006). “High-Performance Fibre Reinforced Concrete”. ACI KL Chapter Bulletin 1(1): pp. 3.
• Latifah Abdol Latif & Sudharshan Naidu. (2003). “The Distance Challenge”. Education Quarterly 29(4): pp. 52-53.

Invited Papers (2)

• S. N. Raman, T. Ngo & P. Mendis. (2009). “Utilisation of Polymer Coatings for Retrofitting of Structures against the Explosive Effects of Blast”. Towards a Green Future in Construction Industry: Proc. 1st Regional Symp. on Sustainable Construction Materials and Building Systems: pp. 91-98. Kuala Lumpur, Malaysia, 12 Oct. 2009.
• R. S. Naidu, M. F. M. Zain & K. S. Tan. (2003). “Compressive Strength Development of Concrete Incorporating Quarry Dust and Mineral Admixtures”. Presented at the Seminar on Construction Waste Management. Kuala Lumpur, Malaysia, 26 Mar. 2003.

Conference Proceedings (54)

• Kazi Tamanna, Sudharshan N. Raman, Jamil. (2018). “A Bibliometric Analysis on Utilization of Rice Husk Ash in Eco-Concreting Applications”. Proc. ASEAN Post Graduate Conference (APGC) 2018: pp. 1-7. Kuala Lumpur, Malaysia, 15 November 2018.
• L. G. Lim, S. N. Raman, M. F. M. Zain, R. Hamid, F. C. Lai. (2018). “Strength and Durability Performance of Ultra-High-Performance Cementitious Composite Enhanced with Carbon Nanofibres”. Proc. Sixth International Conference on Durability of Concrete Structures 2018 (ICDCS2018): pp. 227-232. Leeds, UK, 18-20 July 2018.
• Sudharshan N. Raman, H. M. Chandima C. Somarathna, Azrul A. Mutalib, Khairiah H. Badri. (2017). “Elastomeric Polyurethane for Retrofitting Application of Concrete Structures under Dynamic Loading”. RILEM Proceedings 118: Advances in Construction Materials and Systems – Vol. 2 (ICACMS2017): pp. 549-556. Chennai, India, 3-8 September 2017.
• J. G. L. Lim, S. N. Raman, M. F. M. Zain, R. Hamid, F. C. Lai. (2016). “Properties of Ultra-High Performance Cementitious Composite Incorporating Hybrid Micro-Nano Fibers”. Proc. 7^th International Conference of Asian Concrete Federation (ACF2016): 8 pgs. Hanoi, Vietnam, 30 Nov. – 2 Dec. 2016.
• Shamir Sakir, A. B. M. A. Kaish, S. N. Raman & A. A. Mutalib. (2016). “Recent Trends in Development of Self‐Flowing Mortar incorporating Supplementary Cementitious Materials”. Proc. 2^nd Electronic Conf. on Materials (ECM-2). https://sciforum.net/conference/ecm-2, 2-16 May 2016.
• J. L. G. Lim, S. N. Raman, R. Hamid, M. F. M. Zain, F. C. Lai. (2015). “Synthesis of Ultra-High Performance Cementitious Composite incorporating Carbon Nanotubes”. Proc. 6^th Int. Conf. on Structural Engineering and Construction Management 2015: 8-13. Kandy, Sri Lanka, 11-14 December 2015
• H. M. C. C. Somarathna, S. N. Raman, K. H. Badri, A. A. Mutalib. (2015). “Analysis of Strain Rate Dependent Tensile Behaviour of Polyurethanes”. Proc. 6th Int. Conf. on Structural Engineering and Construction Management 2015: 1-7. Kandy, Sri Lanka, 11-14 December 2015.
• Nurul Suliana M. Ristak, Jacob Lim Lok Guan, Mudiono Kasmuri, Roszilah Hamid, Sudharshan N. Raman. (2015). “Influence of Micro Steel and Polypropylene Fibres on the Dynamic Properties and Porosity of Ultra High Performance Concrete”. Proc.  Int. Conf. on Innovative Engineering and Technologies, Advanced Theoretical Computer Applications: 89-100. Bangkok, Thailand, 27-28 November 2015.
• H. M. C. C. Somarathna, S. N. Raman, K. H. Badri, A. A. Mutalib. (2015). “Mechanical Characterization of Polyurethane Elastomers: For Retrofitting Application against Blast Effects”. Proc. 3rd Conf. on Smart Monitoring, Assessment and Rehabilitation of Civil Structures: 8 pgs. (Paper 48). Antalya, Turkey, 7-9 September 2015.
• A. B. M. A. Kaish, M. Jamil, S. N. Raman, M. F. M. Zain. (2015). “Shear Strength Models for Ferrocement Confined Shear Deficient Square RC Columns”. Proc. 3rd Conf. on Smart Monitoring, Assessment and Rehabilitation of Civil Structures: 6 pgs. (Paper 193). Antalya, Turkey, 7-9 September 2015.
• H. M. C. C. Somarathna, S. N. Raman, K. H. Badri, A. A. Mutalib. (2015). “Tensile Behaviour of Polyurethane under Varying Strain Rates”. Proc. 7^th Asia Pacific Young Researchers and Graduates Symp.: pp. 567-574. Kuala Lumpur, Malaysia, 20-21 August 2015
• M. Abedini, S. N. Raman, A. A. Mutalib. (2015). “Numerical Analysis of the Behaviour of Reinforced Concrete Columns Subjected to Blast Loading”. Proc. 7^th Asia Pacific Young Researchers and Graduates Symp.: pp. 289-299. Kuala Lumpur, Malaysia, 20-21 August 2015
• S. N. Raman, M. Jamil, T. Ngo, P. Mendis, T. Pham (2014). “Retrofitting of RC Panels subjected to Blast Effects using Elastomeric Polymer Coatings”. Proc. Concrete Solutions, 5th Int. Conf. on Concrete Repair: pp. 353-360. Belfast, Northern Ireland, 1-3 September 2014.
• A. B. M. A. Kaish, M. Jamil, S. N. Raman, M. F. M. Zain (2014). “Behaviour of Ferrocement Jacketed Cylindrical Concrete Specimens under Compression”. Proc. Concrete Solutions, 5th Int. Conf. on Concrete Repair: pp. 291-296. (ISBN: 978-1-138-02708-4). Belfast, Northern Ireland, 1-3 September 2014.
• M. H. Md. Zahir, S. N. Raman, M. F. Mohamed, M. Jamil, Z. M. Nopiah. (2014). “The Perception of Malaysian Architects towards the Implementation of Green Roofs: A Review of Practices, Methodologies and Future Research”. Proc. Emerging Technology for Sustainable Development Congress (ETSDC 2014), Vol. 3, 2014: 8 pgs. (http://dx.doi.org/10.1051/e3sconf/20140301022).
• Mohd. Farid Mohamed, Sudharshan N. Raman, Tito Maulana Imam Pratama, Wardah Fatimah Mohammad Yusoff. (2014). “Outdoor Environment of Low-cost Housing: A Case Study of Flat Taman Desa Sentosa”. Proc. Emerging Technology for Sustainable Development Congress, Vol. 3, 2014: 7 pgs. (http://dx.doi.org/10.1051/e3sconf/ 20140301005).
• Mohd. Farid Mohamed, Wardah Fatimah Mohammad Yusoff, Tito Maulana Imam Pratama, Sudharshan N. Raman. (2014). “Satisfaction Perception of Indoor Environment of Low-cost Housing: A Case Study of Flat Taman Desa Sentosa”. Proc. Emerging Technology for Sustainable Development Congress, Vol. 3, 2014: 7 pgs. (http://dx.doi.org/10.1051/e3sconf/20140301001).
• Wardah Fatimah Mohammad Yusoff, Nik Lukman Nik Ibrahim, Mohd. Farid Mohamed, Sudharshan N. Raman, Suhana Johar. (2014). “Course Outcomes Evaluation for Bachelor of Architectural Science in Relation to the National Architectural Identity”. Proc. 2013 Engineering and Built Environment Education Seminar: pp. 332-340. Kuala Lumpur, Malaysia, 25-26 February 2014.
• Mohd. Farid Mohamed, Wardah Fatimah Mohammad Yusoff, Sudharshan N. Raman, Suhana Johar, Nik Lukman Nik Ibrahim. (2014). “Kajian Penerimaan Cadangan Program Sarjana Seni Bina di Universiti Kebangsaan Malaysia (UKM)”. Proc. 2013 Engineering and Built Environment Education Seminar: pp. 490-499. Kuala Lumpur, Malaysia, 25-26 February 2014.
• Mohd. Farid Mohamed, Wardah Fatimah Mohammad Yusoff, Sudharshan N. Raman, Suhana Johar, Nik Lukman Nik Ibrahim. (2014). “Assessment of Course Outcomes (CO) in the UKM’s Bachelor of Science in Architecture Programme”. Proc. 2013 Engineering and Built Environment Education Seminar: pp. 500-510. Kuala Lumpur, Malaysia, 25-26 February 2014.
• Sri Devi Ravana, Nor Aliza Mohd. Amin & Sudharshan Naidu Raman. (2013). “Effect of Assessment on Group Work Activities using Wikis”. Proc. Asian Conf. on Society, Education and Technology 2013: pp. 140-150. Osaka, Japan, 23-27 October 2013.
• Nor Azra Ab. Wahab, Sudharshan N. Raman & Azrul A. Mutalib. (2013). “Numerical Analyses of the Behaviour of Polurea at High Strain Rates”. Proc. 1st Final Year Project Symposium: pp. 241-248. Bangi, Malaysia, 2 July 2013.
• M. H. Md. Zahir, S. N. Raman, M. F. Mohamed, Z. M. Nopiah & M. Jamil. (2013). “A Discussion on Methodologies to Measure the Perception of Malaysian Architects towards the Implementation of Green Roof System”. Proc. Int. Building Control Conf. 2013: 1-5. Kuala Lumpur, Malaysia, 21 November 2013.
• M. F. Mohamed, T. M. Iman Pratama, W. F. Mohammad Yusoff & S. N. Raman. (2013). “Satisfaction Perception of Outdoor Environment by the Occupants of Low-cost Housing: A Case Study of Flat Taman Desa Sentosa”. Proc. Int. Building Control Conf. 2013: 625-631. Kuala Lumpur, Malaysia, 21 November 2013.
• S. N. Raman, T. Pham, T. Ngo & P. Mendis. (2012). “Experimental Investigation on the Behaviour of RC Panels Retrofitted with Polymer Coatings under Blast Effects”. Proc. 2nd Int. Conf. on Sustainable Built Environment: 14 pgs. Kandy, Sri Lanka, 14-16 December 2012.
• A. B. M. A. Kaish, M. Jamil, S. N. Raman, M. F. M. Zain & M. R. Alam. (2012). “Techniques to Overcome the Drawbacks of Conventional Square Ferrocement Jacketing in Strengthening Square RC Columns”. Proc. Int. Conf. on Engineering and Built Environment 2012: 7 pgs. Kajang, Malaysia, 6-7 November 2012.
• A. B. M. A. Kaish, M. Jamil, M. F. M. Zain & S. N. Raman. (2012). “Behaviour of Improved Ferrocement Jacketed Square RC Column under Concentric Loading”. Proc. 3rd Int. Conf. on Construction in Developing Countries: pp. 688-694. Bangkok, Thailand, 4-6 July 2012.
• S. N. Raman, T. Ngo, P. Mendis, H. B. Mahmud, C. H. Lee & T. T. Nguyen. (2010). “High-Strength Rice Husk Ash Concrete incorporating Quarry Dust Fine Aggregates”. Incorporating Sustainable Practice in Mechanics of Structures and Materials: Proc. 21st Australasian Conf. on the Mechanics of Structures and Materials: pp. 843-848. Melbourne, Australia, 8-10 December 2010.
• S. N. Raman, T. Pham, T. Ngo & P. Mendis. (2009). “Modelling the Behaviour of Polymer Coated Reinforced Concrete Panels subjected to Blast Loads”. Proc. 8th Int. Conf. on Shock and Impact Loads on Structures: pp. 497-504. Adelaide, Australia, 2-4 Dec. 2009.

• T. Pham, S. N. Raman, T. Ngo & P. Mendis. (2009). “A Study on the Effects of Fixing Assemblies on the Behaviour of Reinforced Concrete Panels subjected to Blast Loads”. Proc. 8th Int. Conf. on Shock and Impact Loads on Structures: pp. 481-488. Adelaide, Australia, 2-4 Dec. 2009.

• R. Lumantarna, T. Ngo, S. N. Raman & P. Mendis. (2009). “Blast Assessment Procedure for Sustainable Double Skin Façade Systems”. Proc. 8th Int. Conf. on Shock and Impact Loads on Structures: pp. 413-420. Adelaide, Australia, 2-4 Dec. 2009.

• S. N. Raman, T. Ngo & P. Mendis. (2008). “Preliminary Investigation on the Behaviour of RC Panels with Polymer Coatings under Blast Loads”. Futures in Mechanics of Structures and Materials: Proc. 20th Australasian Conf. on the Mechanics of Structures & Materials: pp. 637-643. Toowoomba, Australia, 2-5 Dec. 2008.

• H. B. Mahmud, M. F. A. Malik, R. A. Kahar, M. F. M. Zain & S. N. Raman. (2008). “Influence of Rice Husk Ash on Strength and Durability of High Strength Grade 60 Concrete. Proc. 8th Int. Symp. on Utilization of High-Strength and High-Performance Concrete: pp. 1282-1288. Tokyo, Japan, 27-29 Oct. 2008.

• Sudharshan N. Raman, Tuan Ngo & Priyan Mendis. (2007). “Effect of Quarry Dust on the Workability & Physical Properties of High-Strength Rice Husk Ash Concrete”. Proc. MDCMS I – Vietnam 1st Int. Conf. on Modern Design, Construction & Maintenance of Structures: pp. 252-260. Hanoi, Vietnam, 10-11 Dec. 2007.

• S. N. Raman, M. F. M. Zain, H. B. Mahmud & S. L. Low. (2007). “Utilisation of Quarry Waste as Fine Aggregate in High-Strength Rice Husk Ash Concrete”. Innovations in Structural Engineering & Constructions: Proc. 4th Int. Structural Engineering & Construction Conf.: pp. 545-550. Melbourne, Australia, 26-28 Sep. 2007.

• Hilmi Bin Mahmud, Yew-Chin Koay, Norjidah Anjang Abdul Hamid & Sudharshan Naidu Raman. (2007). “Durability of High-Strength High Performance Rice Husk Ash Concrete”. Proc. 5th Int. Conf. on Concrete under Severe Conditions of Environment & Loading: pp. 959-967. Tours, France, 4-6 Jun. 2007.

• Sudharshan N. Raman & Mohamad Rom Tamjis. (2006). “Recent Developments in the Accreditation of Engineering Programmes in Malaysia: The Washington Accord & Outcome-Based Education”. Transforming Higher Education for the Knowledge Society: Proc. 6th Annual SEAAIR Conf. 2006: pp. 313-319. Langkawi, Malaysia, 5-7 Sep. 2006.

• Sri Devi Ravana, Sudharshan N. Raman & P. Rajesh Kumar. (2006). “Mentorship to Support the Needs of New Faculty Members”. Transforming Higher Education for the Knowledge Society: Proc. 6th Annual SEAAIR Conf. 2006: pp. 232-238. Langkawi, Malaysia, 5-7 Sep. 2006.

• K. Muthusamy, Sh. Rosfashida S. A. Latif, W. S. Wei, R. Hamir & R. S. Naidu. (2005). “Bachelor of Education (Engineering) Program – The Open University Malaysia Model”. Proc. 2005 Regional Conf. on Engineering Education: pp. 53-60. Johor, Malaysia, 12-13 Dec. 2005.

• S. N. Raman, M. F. M. Zain, H. B. Mahmud & K. S. Tan. (2005). “Suitability of Quarry Dust as Partial Replacement Material for Sand in Concrete”. Proc. AEESEAP Int. Conf. 2005. Kuala Lumpur, Malaysia, 7-8 Jun 2005.

• S. N. Raman, M. F. M. Zain, H. B. Mahmud & K. S. Tan. (2005). “Influence of Quarry Dust & Fly Ash on the Concrete Compressive Strength Development”. Proc. AEESEAP Int. Conf. 2005. Kuala Lumpur, Malaysia, 7-8 Jun 2005.

• S. D. Ravana & S. N. Raman. (2005). “A Study on Computer Literacy Levels Among Engineering Undergraduates”. Proc. AEESEAP Int. Conf. 2005. Kuala Lumpur, Malaysia, 7-8 Jun 2005.

• S. N. Raman, M. F. M. Zain & H. B. Mahmud. (2004). “Influence of Quarry Dust & Mineral Admixtures on the 28th Day Initial Surface Absorption of Concrete”. Sustainable Development in Concrete Technology: Proc. 7th Int. Conf. on Concrete Technology in Developing Countries: pp. 33-42. Kuala Lumpur, Malaysia, 5-8 Oct. 2004.

• S. N. Raman, A. B. M. Diah & M. F. M. Zain. (2004). “Influence of Cement Mortar Spacer Blocks on the Strength & Durability of Concrete”. Proc. 8th Int. Conf. on Concrete Engineering & Technology: TS2-5. Kuala Lumpur, Malaysia, 19-21 Apr. 2004.

• R. S. Naidu, M. F. M. Zain & S. E. Ang. (2003). “Compressive Strength & Pull-Out Force of Concrete Incorporating Quarry Dust  and Mineral Admixtures”. RILEM Proc. 32: Int. Conf. on Advances in Concrete & Structure: pp. 278-285. Xuzhou, China, 17-19 Sep. 2003.

• R. S. Naidu, M. F. M. Zain & K. S. Tan. (2003). “Strength and Elasticity of Concrete Incorporating Quarry Dust & Mineral Admixtures”. Proc. 3rd Int. Conf. on Advances in Strategic Technologies: pp. 1179-1184. Kuala Lumpur, Malaysia, 12-14 Aug. 2003.

• R. S. Naidu, K. Muthusamy & M. Fadzil. (2002). “Design and Development of Bachelor of Education (Engineering) Programme – The Open University Malaysia Model”. Proc. 25th ASAIHL General Conf. & Sem. Bangkok, Thailand, 13-15 Dec. 2002.

• K. Muthusamy, R. S. Naidu & M. Fadzil. (2002). “E-Learning Delivery Platform (ELDP) Provider Selection Criteria for Technical Education at Open University Malaysia”. Proc. 25th ASAIHL General Conf. & Sem. Bangkok, Thailand, 13 – 15 December 2002.

• Md. Safiuddin, M. F. M. Zain, M. F. Mahmud & R. S. Naidu. (2001). “Effect of Quarry Dust & Mineral Admixtures on the Strength and Elasticity of Concrete”. Proc. Conf. on Construction Technology 2001: pp. 68-80. Kota Kinabalu, Sabah, Malaysia, 11-13 Oct. 2001.

• Wan Muhd. Aminuddin Wan Hussin & R. Sudharshan Naidu. (2000). “Kesan Tegangan Terhadap Prestasi Jurutera di Tapak”. Proc. Nat. Conf. of Civil Engineering ‘99: P6, 1-8. Lumut, Perak, Malaysia, 24-26 Jan. 2000.

• Muhammad Fauzi Mohd. Zain, Ang San Eng, Tan Kim Song, Sudharshan Naidu Raman & Md. Safiuddin. (2000). “Pengaruh Debu Kuari, Wasap Silika dan Abu Terbang ke atas Sifat-Sifat Mekanikal Konkrit Prestasi Tinggi”. Proc. Nat. Conf. of Civil Engineering ‘99: S2, 1-10. Lumut, Perak, Malaysia, 24-26 Jan. 2000.

• Tan Kim Song, Muhammad Fauzi Mohd. Zain, Sudharshan Naidu Raman & Md. Safiuddin. (2000). “Pengaruh Kadar Nisbah Air/Pengikat ke atas Ciri-Ciri Konkrit Prestasi Tinggi Baru”. Proc. Nat. Conf. of Civil Engineering ‘99: S4, 1-9. Lumut, Perak, Malaysia, 24-26 Jan. 2000.

• Sarina Othman, Ang San Eng, Muhammad Fauzi Mohd. Zain, Sudharshan Naidu Raman & Abd. Halim Samad. (2000). “Kesan Penggantian Debu Kuari dan Bahan Tambah Mineral terhadap Kualiti dan Ketahanlasakan Konkrit Prestasi Tinggi”. Proc. Nat. Conf. of Civil Engineering ‘99: S3, 1-9. Lumut, Perak, Malaysia, 24-26 Jan. 2000.

• Muhammad Fauzi Mohd. Zain, Sudharshan Naidu Raman & Md. Safiuddin. (1999). “Kesan Debu Kuari dan Bahan Tambah Galian ke atas Sifat-Sifat Fizikal Konkrit Prestasi Tinggi”. Prosiding Seminar IRPA–UKM 1999, Jilid III (Separuh Penggal RMK-7), 103: pp. 617-623. Genting Highlands, Pahang, Malaysia, 30 Jul.-1 Aug. 1999.

Posters (4)

• Sudharshan Raman. (2008). “Polymeric Coatings for Enhanced Protection of Concrete Structures from the Effects of Blast”. 2008 Civil & Environ. Eng. Postgrad. Conf. Melbourne, Australia, 30 Oct. 2008.

• Hilmi Bin Mahmud & Sudharshan Naidu Raman. (2006). “High Strength High Performance Rice Husk Ash Concrete”. 17th Int. Invention, Innovation, Industrial Design &Technology Exhibition 2006. Kuala Lumpur, Malaysia, 19-21 May 2006.

• Hilmi Bin Mahmud, Sudharshan Naidu Raman & Koay Yew Chin. (2006). “High-Strength Concrete Incorporating Rice Husk Ash”. Malaysian Technology Expo 2006. Kuala Lumpur, Malaysia, 23-25 Feb. 2006.

• Kanesan Muthusamy, R. S. Naidu & M. Fadzil. (2003). “Merits & Demerits of Virtual Laboratories in Engineering Education”. The 17th Annual Conf. of the Asian Association of Open Universities (AAOU). Bangkok, Thailand, 12-14 Nov. 2003.

Dissertations (3)

• Sudharshan Naidu Raman. (2011). “Polymeric Coatings for Enhanced Protection of Reinforced Concrete Structures from the Effects of Blast”. Doctor of Philosophy (PhD) Thesis: 308 pages. Department of Infrastructure Engineering, The University of Melbourne. Parkville, Victoria, Australia.

• Sudharshan Naidu Raman. (2000). “Effect of Mortar Spacer Blocks on the Mechanical Properties of Concrete (in Malay Language with English Abstract)”. Master of Science (Structural Engineering) Dissertation: 131 pages. School of Civil Engineering, Universiti Sains Malaysia. Tronoh, Perak, Malaysia.

• Sudharshan Naidu Raman. (1999). “Study on the Replacement of Sand with Quarry Dust for High Performance Concrete (in Malay Language with English Abstract)”. Bachelor of Engineering (with Honours) in Civil & Structural Engineering Dissertation: 128 pages. Department of Civil & Structural Engineering, Faculty of Engineering, Universiti Kebangsaan Malaysia. Bangi, Selangor, Malaysia.

Research Reports (Unpublished) (2)

• Sudharshan Naidu Raman. (2008). “The Use of Polymer Coatings to Enhance the Blast and Impact Resistance of Reinforced Concrete Structures”. PhD Confirmation Report: 112 pgs. Department of Civil & Environmental Engineering, The University of Melbourne, Australia, Aug. 2008.

• Sudharshan Naidu Raman. (2005). “Influence of Malaysian Quarry Dust and Rice Husk Ash on the Properties of Concrete”. Project Progress Report (Short Term Research, PJP, Account No.: F0355/2005A): 19 pgs. Submitted to the Institute of Research Management & Consultancy, University of Malaya, Kuala Lumpur, Malaysia, Sep. 2005.